News

On-Line TOC Process Analyser for Return Condensate, Steam Condensate and Boiler Feed Water

Types of Water: Boiler Feed Water, Process Water, Condensate Return, Pure Water

 

Parameters: TOC, DOC

On-Line TOC Process Analyser for Return Condensate, Steam Condensate and Boiler Feed Water

On-Line TOC Process Analyser for Return Condensate, Steam Condensate and Boiler Feed Water 

Title: On-Line TOC Process Analyser for Return Condensate, Steam Condensate and Boiler Feed Water 

Medium: Asian Environmental Technology, International Labmate UK

Media Issue: 5 / 2015

Types of Water: Boiler Feed Water, Process Water, Condensate Return, Pure Water

Parameters: TOC, DOC

Content: Guidelines for boiler water quality are getting more stringent. Especially when the boiler pressure is
high the Total Organic Carbon concentration limit is very low e.g. 0.1 to 0.5 ppm (milligram carbon/
litre). By use of an on-line TOC analyser the quality and the organic content of the boiler feed water
and the return condensate can be monitored. Obviously these TOC analysers should be reliable, easy
to validate and of outstanding quality. Also the correct design, construction and implementation of
the total TOC analyser installation is of great importance. It includes the sample take-off point, a fast
sample loop and a sample conditioning system. Furthermore, the TOC analyser should have capabilities
to be calibrated and validated. The new QuickTOCcondensate of LAR Process Analysers AG has the
unique patented easy to use QuickCalibration and validation feature. Furthermore this analyser is fast
and capable of sequentially analysing multiple streams and/or manually taken grab samples.

The total organic carbon (TOC) is one of the most important sum parameters in the assessment of the organic pollution of water. Since it includes all carbon compounds as one mass, it is exactly defined and an absolute quantity. Therefore, it may be determined directly.

Read more about TOC measurement methods.

Total organic carbon analyzers of LAR Process Analysers AG

The chemical oxygen demand (COD) indicates the amount of oxygen which is needed for the oxidation of all organic substances in water and is thus an important indicator for water analysis. It is considered in the planning and controlling of treatment, as well as assessing its efficiency, thus forming the basis for the calculation of waste water charges.

The COD can be determined in laboratory or online, whereby these methods significantly differ in duration and consumables used.

Read more about COD measurement methods.

COD analyzers of LAR Process Analysers AG

The biochemical oxygen demand (BOD) indicates the amount of oxygen which is needed for the biological degradation of organic substances in water.

Since the generally used BOD5 excludes the nitrification part of the process, this parameter is poorly suited for the control of waste water treatment plants. Alternatively, the total BOD is well-suited, due to the determination of the nitrogen as well as the carbonaceous part of biological degradation.

Read more about the online measurement of BOD.

Toxicity is described as the direct harmful effect of a substance on organisms. These effects can already occur at low concentraions of toxic substances and are dependent on the incubation period and the dosage.

Some test methods that are available on the market can detect toxicity by using fish, daphnia, molluscs, algae or luminous bacteria and testing whether a water sample has a toxic effect on the organisms. They do not, however, identify exactly which toxins are present.

Read more about online toxicity measurements.

BOD / toxicity analyzers of LAR Process Analysers AG

The total nitrogen bound (TNb) shows the pollution of water caused by nitrogen compounds. Nitrogen may be present as ammonia, ammonium salts, nitrites, nitrates and organic nitrogen compounds.

In contrast to single measurements of the above-mentioned components, the TNb determination contains all these substances in a single analysis process.

Read more about online TNb measurements.

The total phosphorus (TP) is a sum parameter that shows the organic and inorganic phosphorus compounds in water. Phosphorus is an essential nutrient for humans as well as flora and fauna. However, the substance – depending on its concentration– may cause serious damage.

Read more about online TP measurements.

TN TP analyzer of LAR Process Analysers AG