BOD Analyzer for Controlling WWTPs

LAR's BioMonitor is an online BOD analyzer for the determination of biochemical oxygen demand (BOD), respiration and toxicity in waste water. Using BioMonitor, operators can control their waste water treatment plant in an optimal way.


Features & Benefits

  • Measurement range: 1-200.000 mg/l BOD, 0-100 % Toxicity, Respiration in mg O2/l x min
  • Response time: 3-4 min. (customizable)
  • High degradation
  • Sludge activity
  • Using the plant's own biomass
  • No memory effects
BOD Analyzer BioMonitor

LAR's biological oxygen demand analyzer is suitable for optimal waste water treatment plant controlling:

Using analyzer options, the measurement system is adaptable for every measurement challenge.



For safe operation in hazardous areas, there are different protection housings available:

  • IP54 (Standard)

The miniature waste water treatment plant. Use of the own activated sludge.

Similar to the functional principle of a biological treatment plant, the waste water to be tested is mixed with activated sludge and air and continuously passed through the measurement cascade. Upon exiting the reactor cascade, the residual oxygen of the air is carried out and is measured with an oxygen sensor, wherein the volume flows of waste water, activated sludge and air are well defined or controlled. Important in this process is that the system's activated sludge is used to actually simulate the biology of the plant. Thus, the measurement results are of special relevance to the circumstances of the treatment plant and are always directly proportionate to their specific characteristics.

The total BOD. What matters.

In contrast to the standard BOD5 method the BioMonitor measures the total BOD. In the BOD5 measurement nitrification inhibitors are added to the sample, which suppress the degradation of nitrogen compounds. This results in the determination of the degradation of carbon compounds (carbonaceous-BOD) only and the nitrification part is not considered in BOD5 measurements.

As a waste water treatment plant can be reliably controlled and monitored only by the determination of total BOD, the BOD5 is insufficient for this purpose.

Alternatively to the BOD5 measurement LAR AG provides an online respirometer, which operates like a miniature waste water treatment plant: The BioMonitor.

The BOD analyzer degrates nitrogen and carbon compounds in special waste water cascades, so that the meaningful total BOD can be determined within 4 minutes.

The BioMonitor. Ultra quick measurements and maintenance.

The measurement of the BOD takes place in less than 4 minutes and therefore it is faster than the BOD5 measurement, which requires 5 days. This speed guarantees that very short peaks can be determined very well during a daily cycle.

BOD / Toxicity

The BOD indicates the amount of oxygen which is needed for the biological degradation of organic substances in water.

Toxicity is described as the direct harmful effect of a substance on organsims.

Need further information?

Contact us right here

Related News

LAR's BioMonitor is an online BOD analyzer for the determination of the total biochemical oxygen demand (BOD). The analyzers' functional principle is similar to a miniature biological waste water treatment plant.


The biochemical oxygen demand (BOD) reflects the demand of oxygen that is needed for the degradation of all biological degradable substances in water. Thus, the BOD, also called biological oxygen demand, is an important indicator for the assessment of the pollution of water.


Types of Water: Surface Water

Parameters: COD, TOC, DOC, TOD, Toxicity