TN Analyzer QuickTONultra

TN ANALYZER FOR WASTE WATER AND PROCESS CONTROL

The QuickTONultra is the ultimate online TNb analyzer for the determination of total nitrogen bound (TNb) in waste water and process water applications.

Features and Benefits

  • Measurement range: 0 - 200 mg/l N
  • Response time: 1 - 2 minutes
  • Highest combustion temperature (1,200°C) available on the market
  • Measurement of complete samples incl. solids/ particles
  • Excellent detection value from ammonia and nitrate nitrogen
  • High salt concentrations possible
  • Catalyst-free technique
  • No filtration necessary
  • No memory effects
  • According to DIN EN 12260:2003 and ISO/TR 11905-2:1997
TN analyzer QuickTOCultra

Applications

LAR's total nitrogen analyzer is suitable for a variety of applications and types of water:

  • Water Influent
  • Water Effluent
  • Discharge Control
  • Industrial Waste Water
  • De-Icing Water
  • Drinking Water
  • Groundwater
  • Process Water
  • High Salt Concentrations
  • Cooling Water

Options

Using analyzer options, the measurement system is adaptable for every measurement challenge.

  • FlowSampler
  • Multi-stream measurement for up to 6 sample streams
  • Combination with COD and TOC detection

Housings

For safe operation in hazardous areas, there are different protection housings available:

  • IP54 (Standard)
  • NEMA 4X
  • ATEX Zone I
  • ATEX Zone II
  • IECEx

High salt concentrations. No problem with the QuickTONultra.

This online TNb analyzer can handle salt concentrations up to even 300 g/l sodium chloride (NaCl). Salts that melt at the temperature of 1,200°C are vaporised by the combustion power and carried out with the carrier gas to settle in a special retrieving device.

The QuickTONultra. Ultra quick measurements and maintenance.

The QuickTONultra is designed to operate in a batch mode. The TNb measurement takes place in within 1 - 2 minutes. This speed guarantees that very short peaks can be determined very well during a daily cycle.

The analyzer's availability is over 98%. The weekly service is about 30 minutes.

The detection. You have the choice.

The chemiluminescence method (CLD) is wellknown and proved. Its disadvantages, however, lay in its high cost of investment, consumables as well as its high maintenance efforts.

With regards to the economic efficiency the innovative electro-chemical detection (ECD) is a good alternative. The measurement cell is less expensive in purchase and needs only minimal maintenance since the requirements for the carrier gas are significantly lower. Nevertheless, it offers the most comparable measurement accuracy.

Measurement principle of QuickTONultra

Request for Quote

LAR Process Analysers AG
Neuköllnische Allee 134
12057 Berlin
Germany